On November 20, the white Chery Tiggo 2 Pro from the IONX Lab test came to Prime Detailing in Karaganda for its first scheduled inspection and touch-up. Six weeks and 1,500 km have passed since it was wrapped in PCU-based film.
- No lifted film edges.
- No bubbles.
- No damage found.
- Bright gloss; the material looks good.
- No visible changes since installation.
The numbers
- Installation: October 9, 2026, at 6,000 km.
- Inspection: November 20, 2026, at 7,500 km.
- In between: 42 days and 1,500 km.
- Package: Luxe — bumper, hood, front fenders, headlights, mirrors, A-pillars, roof edge, handle cups and door edges.
What was checked
The installers went over every area under film. The first weeks after installation are the most telling: if a film is poorly chosen or installed, this is usually when edges lift on curves, bubbles stay under the film and dirt starts collecting along the edges. None of that was found, so no edges had to be re-stuck and no bubbles had to be removed.
Any change in tone is easy to see on a white car, so we track yellowing separately. After six weeks there is no visible change in tone, and the gloss is still bright.
Inspection photos



Photos are unretouched and unfiltered; license plates are hidden. Tap a photo to open it full size.
What's next
The next checkpoint is three months, in January 2027. By then the film will have been through frost, road salt, snow and grit. We will shoot the same areas, compare the protected panels with bare paint and check the edges after winter washes. For how to look after film during this period, see PPF care in winter.
All photos and checkpoints are on the IONX Lab page. If the film performs well, it will join the IONX brand lineup.


